Roll To Roll Foil Stamping Machine

The foil transfer on the textile is done by the means of stamping process.

The foil stamping process takes place in various stages. In the first stage the adhesive is transferred to the textile through the Flat Bed screen or a Rotary Screen. The adhesive coated textile passes through the Foil Stamping Machine where in there is an unwinding device for textile and foil roll. These simultaneously pass through a hot stamping device after which, the foil is transferred to the Precoated textile.

In the next stage, the textile goes through the winding section where the foil and the textile are separated and individually wound.

Roll to roll foil stamping can be done in various shades and colours like gold, silver, multicolor and tone to tone. This stamping can be done in very minute and small designs also with a raised effect, if the stamping order is in large quantities. This type of foil stamping is very useful if followed through on a finished dyed or printed textile and if any additional effects are required.

This type of roll to roll foil stamping machine is used in garments where particular portions of the textiles like sarees, dress materials, furnishings etc. need to be highlighted by the foil.

There are two models are available FS 700 and FS 700/N

Technical Specifications: FS 700

Working width Mechanical Speed Electrical Power Compressed Air Space Requirement Roll
1200 mm 40 m / min 9 kW 6 - 8 bar 5 m Length x 4.5 m Width Hard chrome plated
1600 mm 40 m / min 12 kW 6 - 8 bar 5 m Length x 5 m Width Hard chrome plated
1800 mm 40 m / min 15 kW 6 - 8 bar 5 m Length x 5.5 m Width Hard chrome plated

Technical Specifications: FS 700 / N

Working width Mechanical Speed Electrical Power Compressed Air Space Requirement Roll
1200 mm 40 m / min 9 kW 6 - 8 bar 5 m Length x 4.5 m Width Hard chrome plated with oil jacketed drum
1600 mm 40 m / min 12 kW 6 - 8 bar 5 m Length x 5 m Width Hard chrome plated with oil jacketed drum
1800 mm 40 m / min 15 kW 6 - 8 bar 5 m Length x 5.5 m Width Hard chrome plated with oil jacketed drum

# Design and specifications are subject to change without prior intimation.
# Required size available on demand.